19.05.2012
phone: + 375 17 259-06-90, fax: + 375 17 313-45-40
e-mail: info@npo-center.com
e-mail: info@npo-center.com
Main page
Equipment
Centrifuges
Industrial
The automatic centrifuge with side-filtration and batch-type inertial discharging of sediment
Equipment
Centrifuges
Industrial
The automatic centrifuge with side-filtration and batch-type inertial discharging of sediment
The automatic centrifuge with side-filtration and batch-type inertial discharging of sediment
The automatic centrifuge with side filtration and batch-type inertial discharge of sediment is intended for dehydration of hard-to-filtrate suspensions in food industry (suspensions of milk sugar, casein, malt-residue, potato, etc.), in chemical industry (ammonium sulfate), in mining industry (fluorite, quartz) and in other industries. The possibility to detain the material in the centrifugal field at separation factor up to1500 g provides the obtaining of a required quality product as well as the treating of suspensions with S:L phase correlation = 1 : 2 – 1 : 50 and with the size of particles of the solid phase = 10 - 3000 mkm.
Liquid phase withdrawal is done uninterruptedly in the course of charging whereas the discharge of dewatered material, filtration and finishing squeezing – periodically.
The rotor filter element has a possibility of centrifugal regeneration of a filtering partition in the course of rotor discharge. Any type of a filter fabric as well as a metal net can be used as a filtering partition.
On the basis of these centrifuges there have been developed complexes to process potato, fruits and vegetables into dry semi-finished products. The application of this equipment provides a 4 - 6 times reduction in energy expenses to dry the product, the increase in quality and product output and the reduction in metal consumption. A wide application of such technologies will make it possible to reduce greatly fruits and vegetables storage losses.
In modern practice the obtaining of milk-protein concentrates assumes more and more importance. The appliance of centrifugesits obtaining makes it possible:
to reduce protein losses by 70%-90%, to increase the yield of finished product by 8%-10% while producing wet milk-protein concentrates. When producing dry concentrates - by 18%-20%;
to use an effective method to clarify whey and then make it ready for further processing as well as to expand its area of application;
to perform sewage treatment.
Technical properties
Description | Value |
Model | ФВП901К |
Productivity on sediment, kg/h | до 600 |
Rotor: diameter, m | 0,9 |
Installed capacity, kW | 30,5 |
Power consumption, kW | 17-18 |
Pressure in pneumatic system, atm | 3-6 |
Overall dimensions, m: | 2,13x1,8x1,8 |
Mass, t | 2,3 |
phone: + 375 17 259-06-90, fax: + 375 17 313-45-40, e-mail: info@npo-center.com